Anchorseal
ANCHORSEAL® Classic is a premium wax emulsion end sealer for the prevention of end checks and drying splits in hardwood and softwood logs and lumber. By controlling the rate of moisture loss, up to 90% of end checks can be prevented.
Product Features
Prevents up to 90% of drying splits
Reduces blue stain and sapstain in logs
Improves yield with less waste
Water based
Non-hazardous
No solvents
Available in summer and winter formulas
Soap and water cleanup
Recommended Applications
Hardwood logs and lumber
Softwood timbers and lumber
Debarked logs
Log exports
Woodturning blanks
Log ``cookies``
Physical Characteristics
Appearance: Viscous, white liquid that dries clear (unless pigmented)
Viscosity: 4000 cps
Specific Gravity: 0.95 (8 lbs per gallon/0.95 kg per liter)
Storage: Above 50°F/10°C
Available Quantities
55 gallon/195 kg Drum | 275 gallon/975 kg Tote
Application Instructions
Preparation
All areas to be coated should be clear of dirt and debris
Application
Apply ANCHORSEAL using a brush, roller or sprayer until it begins to drip slightly
For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
Coverage
100 sq. ft./gallon (2.5 m2/liter), or three bundles of lumber (15 to 20 logs) when applied to both ends. Coverage varies depending on application method.
Cleanup and Storage
Clean application equipment using hot soapy water
Store unused ANCHORSEAL above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage
Long Lasting Waterproof Protection
Get now the best and eco-friendly protection from water damage and decay for your wood and concrete.
Anchorseal 2
ANCHORSEAL® 2 is a hybrid of plant-based polymers and wax that protects the ends of green logs and lumber from checking and splitting. It is a high-performance, economical choice for customers.
ANCHORSEAL 2 is best-in-class for the protection of exotic hardwood decking. When carefully applied to the freshly cut ends of tropical hardwoods, such as ipe, Brazilian walnut, mahogany and tigerwood, ANCHORSEAL 2 prevents up to 90% of end checking, protecting your investment and extending the life of the deck.
Product Features
Prevents up to 90% of drying splits
Prevents end checking in deck boards
Improves yield with less waste
Water based
Non-hazardous
No solvents
Available in summer and winter formulas
Soap and water cleanup
Recommended Applications
Hardwood logs and lumber
Tropical hardwood lumber
Exotic hardwood decking
Ipe decking
Woodturning blanks
Log ``cookies``
Live-edge wood slabs
Physical Characteristics
Appearance: Viscous, white liquid that dries clear (unless pigmented)
Viscosity: 4000 cPs
Specific Gravity: 0.95 (8.2 lbs. per gallon / 0.95 kg per liter)
Storage: 50°F/10°C and not exceed 95°F/35°C
Available Quantities
INDUSTRIAL
275-Gallon Tote | 55-Gallon Drum | 5-Gallon Pail
RETAIL
2-Gallon Pail | 1-Gallon Can | 1-Quart Can
Application Instructions
Preparation
All areas to be coated should be clear of dirt and debris
Application
Apply ANCHORSEAL 2 using a brush, roller or sprayer until it begins to drip slightly
For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
If applying to the cut ends of deck boards: apply ANCHORSEAL 2 carefully with a thin brush or sponge applicator. To avoid potential staining, do not allow ANCHORSEAL 2 to get on the face of the boards.
Cleanup and Storage
Clean application equipment using hot soapy water
Store unused ANCHORSEAL 2 above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage
Do you need assistance in choosing the right wood and cement sealer for you?
We can help you from selecting the correct product you need in your project
from its professional engineering services.
Do you need assistance in choosing the right wood and cement sealer for you?
We can help you from selecting the correct product you need in your project
from its professional engineering services.