Seal Once Poly
SEAL-ONCE® POLY Premium Wood Sealer shields wood from water damage and decay by forming a strong, durable and flexible coating on the surface. The enhanced UV inhibitors and superior abrasion resistance offer the highest level of protection against the elements.
POLY is a single component, water based aliphatic polyurethane that is APEO free. It is an eco-friendly, ultra-low VOC product that does not contain mercury, heavy metals or silica. It will not harm pets, plants or people. The nontoxic, low odor formula dries quickly and provides superior adhesion. It is easy to clean and is appropriate for both interior and exterior use.
POLY is available in both Satin and Low Gloss finishes that go on milky white and dry clear. It will not alter the color of the wood, yellow or discolor over time.
Product Features
Eco-friendly
Non-toxic; will not harm pets, plants or people
Ultra-low VOC
Water based formula
Flexible barrier
Non-yellowing formula
Superior abrasion resistance
High impact resistance and hardness
UV blockers prevent color fading
Prohibits mold & mildew growth
Soap & water cleanup
Recommended Applications
Railings
Fences
Wood siding
Log homes
Wood trim
Wood floors
Outdoor furniture
Garage doors
Physical Characteristics
Color: Milky white liquid, dries clear
Flash Point: None
pH : 8-9
Solvents: Water
lbs/gal : 8.1
Specific Gravity: 1.04
Viscosity: 100 cps
Application Temp. : 50°F/10°C* – 95°F/35°C
Odor: Nil
VOC Content : 22g/L**
*Does not apply when air or surface temperature is below 50°F/10°C or may fall below 50°F/10°C within 24 hours after application.
**VOC Content determined via EPA Method 24
Packaging Sizes
1 Quart Can | 1 Gallon Can | 5 Gallon Pail
Freight Class
55
Application Instructions
Preparation
All surfaces should be cleaned before sealing for best performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners. Recommend SEAL-ONCE All Wood Cleaner.
After cleaning, test absorbency of surface by sprinkling a few drops of water on the surface. If the water does not readily penetrate the surface, stripping will be necessary to remove old coatings prior to applying SEAL-ONCE POLY Premium Wood Sealer. Retest surface when dry.
Application
Do not use if air or surface temperature is below 50°F/10°C or above 95°F/35°C.
Do not apply in rain or when rain is expected within 24-48 hours.
DO NOT THIN. Mix well. Stir contents or shake thoroughly prior to use.
Apply fi rst coat with a synthetic brush, pump-up garden sprayer, air-assisted and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back bruch for best results.
Allow fi rst coat to dry completely before applying a second coat. First coat should be dry within 2 hours.
Apply second coat following the same instructions as for the first coat.
If more than 24 hours have passed before applying the second coat, scuff sand the first coat to ensure proper adhesion.
For best results, apply in the shade and out of direct sunlight.
Apply to all surfaces and ends.
Use only with other SEAL-ONCE waterproofing products.
Allow 4-6 hours for surface to dry completely before permitting light foot traffic.
Coverage
Approximate coverage: 300-400 sq. ft./gallon per coat. Actual coverage will vary due to porosity of surface.
Drying Time
Allow approximately 4-6 hours for surface to dry, depending on temperature and humidity, before subjecting surface to light foot traffic.
Allow 24-48 hours for full cure, depending on temperature and humidity.
When recoating, ensure first coat has dried completely and is dry to the touch. Allow approximately 2 hours before applying second coat.
Cleanup and Storage
Clean sprayer equipment and brushes with warm soapy water.
Store above 32°F/0°C to protect from freezing.
Shelf life (unopened): 12-18 months.
Disposal: soap and water cleanup; no special disposal procedure needed.
Precautions
Protect adjacent areas from overspray and runoff including windows and siding. Immediately remove overspray with soap and water.
Avoid breathing in spray. If inhaled, move to fresh air.
Avoid contact with eyes. If splashed into eyes, rinse with clean water for 15 minutes.
If skin irritation occurs, wash area with soap and water.
If accidentally ingested, immediately drink 2 glasses of water and contact a physician. Do not induce vomiting.
Long Lasting Waterproof Protection
Get now the best and eco-friendly protection from water damage and decay for your wood and concrete.
Seal Once Poly Concrete/Masonry Sealer
SEAL-ONCE® POLY Concrete & Masonry Sealer shields concrete and masonry from water damage and decay by forming a strong, durable and flexible coating on the surface. The enhanced UV inhibitors and superior abrasion resistance offer the highest level of protection against the elements.
POLY is a single component, water based aliphatic polyurethane that is APEO free. It is an eco-friendly, ultra-low VOC product that does not contain mercury, heavy metals or silica. It will not harm pets, plants or people. The nontoxic, low odor formula dries quickly and provides superior adhesion. It is easy to clean and is appropriate for both interior and exterior use.
POLY is available in a Satin finishe that applies milky white and dries clear. It will not alter the color of the concrete, yellow or discolor over time.
Product Features
Eco-friendly
Non-toxic; will not harm pets, plants or people
Ultra-low VOC
Water based formula
Flexible barrier
Non-yellowing formula
Superior abrasion resistance
High impact resistance and hardness
UV blockers prevent color fading
Prohibits mold & mildew growth
Soap & water cleanup
Recommended Applications
Concrete driveways
Walkways
Garage floors
Patios
Pre-cast pavers
Faux and veneer stone
Brick
Simulated brick
Acid-stained, colored or stamped concrete
Sandstone
Exposed aggregate
Slate
Tile (unglazed)
Stucco
Concrete block
Physical Characteristics
Color: Milky white liquid, dries clear
Flash Point: None
pH : 8-9
Solvents: Water
lbs/gal : 8.1
Specific Gravity: 1.04
Viscosity: 100 cps
Application Temp. : 50°F/10°C* – 95°F/35°C
Odor: Nil
VOC Content : 22g/L**
*Does not apply when air or surface temperature is below 50°F/10°C or may fall below 50°F/10°C within 24 hours after application.
**VOC Content determined via EPA Method 24
Packaging Sizes
1 Gallon Can | 5 Gallon Pail
Freight Class
55
Application Instructions
Preparation
All surfaces should be cleaned before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime and mold and mildew stains with appropriate cleaners. Recommend SEAL-ONCE Concrete/Masonry Cleaner.
After cleaning, test absorbency of surface by sprinkling a few drops of water on the surface. If the water does not readily penetrate the surface, stripping will be necessary to remove old coatings prior to applying SEAL-ONCE POLY Concrete and Masonry Sealer. Retest surface when dry
Application
Do not use if air or surface temperature is below 50°F/10°C or above 95°F/35°C.
Do not apply in rain or when rain is expected within 24-48 hours.
DO NOT THIN. Mix well. Stir contents or shake thoroughly prior to use.
Apply two coats with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results.
Allow first coat to dry completely before applying a second coat. First coat should be dry within 2 hours.
Apply second coat following the same instructions as for the first coat.
If more than 24 hours have passed before applying the second coat, scuff sand the first coat to ensure proper adhesion.
On very porous masonry, a third coat may be necessary.
For best results, apply in the shade and out of direct sunlight.
Apply to all surfaces and ends.
Use only with other SEAL-ONCE waterproofing products.
Allow 4-6 hours for surface to dry completely before permitting light foot traffic.
Coverage
Approximate coverage: 300-400 sq. ft./gallon per coat. Actual coverage will vary due to porosity of surface.
Drying Time
Allow approximately 4-6 hours for surface to dry, depending on temperature and humidity, before subjecting to light foot traffic.
Allow 24-48 hours for full cure, depending on temperature and humidity
When recoating, ensure first coat has dried completely and is dry to the touch. Allow approximately 2 hours before applying second coat.
Cleanup & Storage
Clean sprayer equipment and brushes with warm soapy water.
Store above 32°F/0°C to protect from freezing
Shelf life (unopened): 12-18 months.
Disposal: soap and water cleanup; no special disposal procedure needed.
Precautions
Protect adjacent areas from overspray and runoff including windows and siding. Immediately remove overspray with soap and water.
Avoid breathing in spray. If inhaled, move to fresh air.
Avoid contact with eyes. If splashed into eyes, rinse with clean water for 15 minutes.
If skin irritation occurs, wash area with soap and water.
If accidentally ingested, immediately drink 2 glasses of water and contact a physician. Do not induce vomiting.
Do you need assistance in choosing the right wood and cement sealer for you?
We can help you from selecting the correct product you need in your project
from its professional engineering services.
Do you need assistance in choosing the right wood and cement sealer for you?
We can help you from selecting the correct product you need in your project
from its professional engineering services.